Give Us A Call
877-585-4042

OxyView Flow Meter

Availability: In stock

$21.95

Pneumatic real-time oxyen flow meter for use with oxygen cylinders, concentrators and other oxygen delivery systems.
 $21.95 - Free Shipping!

Oxyflow Oxyview Oxygen Meter

More Views

  • Oxyflow Oxyview Oxygen Meter
  • Oxyview Directions

Features

OxyView™ is a pneumatic real-time oxygen flow meter for use with oxygen cylinders,

concentrators and other oxygen delivery systems. This device can measure the flow rate of

oxygen from 0-4.5 l/m. It can be attached at all times and used to assure and measure oxygen

flow rate. No batteries are required for product operation.

 

 

DIRECTIONS FOR USE

CONTENTS:

1 - OxyView™ Device

2 - Rubber Bushing Connectors

 

Directions

 

1. Cut large cannula oxygen hose 6" to 12" near

the cannula connection.

DO NOT cut hose above the cannula connection into the smaller

hose.

 

2. Connect the long end of the rubber bushing

connector to the large hose sections by firmly

pressing the large hose into the long end of

the rubber bushing connector, and connect

the OxyView™ to the short end of the rubber

bushing connector between the two sections.

All connections should be firmly placed.

 

OXYVIEW™ MAY BE PLACED ANYWHERE

BETWEEN THE CANNULA AND THE OXYGEN

SOURCE. IT MAY ALSO BE PLACED BETWEEN

THE EXISTING RUBBER BUSHING CONNECTORS

BETWEEN THE CANNULA AND THE HOSE

EXTENSION, OR AT THE REGULATOR.

 

WARNING: WHITE ARROW ON OXYVIEW SHOULD BE IN

DIRECTION OF OXYGEN FLOW, OR POINTING

TOWARD THE CANNULA.

 

Specification

Interior Red Piston
DIE-Trans Dark Red 

Exterior Body Hot-Stamp Paint

Foil P811N

Dimensions
1 3/8" Length and 7/16” Diameter

Spring
316 Stainless Steel

Total Weight
0.128 Ounces or 3.98 grams